Suction Embedded Anchors for Moorings

Suction Embedded Anchors for Moorings

Share on facebook
Share on google
Share on twitter
Share on linkedin

SPT Offshore can design and fabricate Suction Embedded Anchors for various floating structures and facilites, such as FPSO’s, FPU’s, SPARSs, SBMs, offloading buoys etc. SPT Offshore installs SEAs and complete mooring lines with a tailored Offshore Construction Vessel and/or Anchor Handling Tug. Alternatively, SPT Offshore also performs suction pile and SEA installation services from Company’s vessel(s).

Benefits of Suction Embedded Anchors for Moorings

  • Holding capacity independent of load angle.
  • No external load tests required.
  • Extremely high weight to holding capacity ratio.
  • High capacity suction pumps, reducing the critical installation time up to a factor of 5. SEA installation with SPT Offshore pumps can be done within 30 minutes.
  • The SAPS-003s pump has an integrated lifting and upending frame.
  • No venting required.
  • Engineering and installation by one party, hence SPT Offshore takes over installation and in-situ responsibility.

Product Characteristics

Transportation and installation

  • Suction pile installation to maximum of 3,000 m water depth.
  • No limit on suction pile capacity.
  • Suction pump lift capacity for suction piles up to 200 mT weight.
  1. Mount suction pile follower on SEA.
  2. Dock suction pump onto suction pile follower/SEA assembly.
  3. Upend suction pile follower/SEA assembly (if required) and lift into the water.
  4. Lower to seabed, position and orientate with ROV.
  5. Lower suction pile follower/SEA assembly to self weight penetration.
  6. Close vent valve in suction pump and perform suction operation.
  7. At target penetration, reverse suction process and retrieve suction pile.
  8. SEA opens during retrieval of the suction pile follower.
  9. Recover suction pump and suction pile follower to deck.
  10. SEA ready for use.