HomeSolutionsSubsea StructuresSuction Pile Clusters (SPC) for Subsea Structures

Suction Pile Clusters (SPC) for Subsea Structures

If you're looking for a quick, efficient and low cost foundation for subsea structures, founding these on SPT Offshore's Suction Pile Clusters (SPC) is the solution

 

Product Characteristics

  • SPC with 3 bundled suction piles and subsea connector
  • SPC lift capacity of the SPT Offshore's suction pump up to 200 mT
  • SPC installation to maximum of 3,000m water depth
HessCeiba5.jpg

Benefits of SPCs for Subsea Structures

  • Proven technology with numerous suction pile founded structures installed worldwide
  • Very swift and vibration free offshore installation
  • Fabrication costs are reduced significantly, since no pile sleeves, -catchers, -centralizers and mud mats are required
  • No pile drive-, leveling- and grout spread and operation required
  • Leveling of the structure < 0.25 degrees by selective suction
  • Easy decommissioning by reversed installation
  • Engineering and installation by one party, hence SPT Offshore takes over installation and in-situ responsibility

Transportation and installation

  1. Lift suction pump on SPC and lock using remotely operated hydraulic pins
  2. Open suction pump vent valve
  3. Lift suction pump using SAPS-002 lift frame and lower to seabed
  4. Position and orientate SPC using ROV
  5. Lower suction pile to self weight penetration and close vent valve
  6. Suction operation with ROV
  7. SAPS-002 proportional control of the flow in each suction pile of the SPC makes verticality
  8. Unlock suction pump with ROV hotstab and remove suction pump

SPT Offshore Track Record for SPCs for Subsea Structures

Amerada Hess Ceiba Subsea Development

 

+